Category: Uncategorized
-
Boat ramp-Bulkhead-Pier
Built a great bulkhead and boat ramp in Biloxi. Lots of maintenance work and another happy customer!
-
Do It Yourself! We do that! Just finished a fishing pier in Eagle Point Biloxi.
Wanna get your hands dirty? Wanna put your personal touch on your project. KMC will do as little or as much as you want. We installed the pilings, stringers, deck boards and banded the roof. Great project for a great owner. Thanks Travis!
-
40’x34′ Boat House, Deck and Pier
Just put the wraps on a 40′ long by 14′ wide Boat House with a 40’x5′ Fishing Pier and a 50′ long by 16′ wide Deck. This great project included a 13k Deco Boat Lift and a 2,500# Deco PWC Lift. Everything was finished in time for summer!
-
Eagle Point (Biloxi MS) Project Complete!
It was great working around the corner from the House! Finished up excavating a large portion of the bank to make room for a new boat lift and pier. The boat lift installed was a DECO 10,000# lift with CRS (Cable Retention System) to keep those cables wound tight with a remote and auto stop.…
-
The best view of a past project is from the latest project!
We finished this Bulkhead on the Biloxi River over the winter. Pictures were taken from a pier/boathouse we finished up recently. Bulkhead was built on the Biloxi River using 16′ bulkhead boardsand 25′ pilings. Should stay awhile.
-
Finished up Bulkhead/Boat house project and waiting on the Deco Lift.
Almost done! Waiting on a 16,000# Deco lift to complete this beautiful boat house and bulkhead project. The river systems in South Mississippi offers some of the most challenging opportunities to preserve property and turn potential disasters into beautiful, family friendly destinations. This job is North of I-10 on the Biloxi River in Gulfport.
-
Bulkhead is almost done now on with the pilings for the boat house
The bulkhead is finished. Some backfill will be installed and time for the pier. The boat house pilings are going now. The job is on the Biloxi River.
-
Started another Bulkhead and Boathouse on the Biloxi River. Burr…22 degrees this morning!
Working on a new Bulkhead and Boathouse on the Biloxi River. Building a 85′ bulkhead and a 22′ by 40′ boathouse.
-
Bulkhead on Biloxi River in Gulfport is finished
All work is complete and waiting for landscapers. The new bulkhead in Gulfport Mississippi consist of 25′ -10″ butt pilings on 5′ centers. Walers are 20′ 2×8’s with staggered joints. Bulkhead boards are 2x8x16′ all rough cut. Tie backs are 3/4″ all thread with o.g. washers. Backfill is crushed concrete and each piling is tied…